Water pumps run on electric motors and their cooling system is far from enough if the pump runs for 24 hours a day a few days to finish a big print. This shroud helps fitting a 40mm fan to blow against pump body improving cooling, besides the cupola has provisions to pass the wires in to connetc to the motor connectors.
For the price you have access to download the STL file that you can print yourself.
40mm twin fan cooler support for water pump outer diameter 27mm to 30mm
- Brand: 3D Mential
- Product Code: 40mm twin fan cooler support for water pump
- Availability: In Stock
-
£2.00
- Ex Tax: £2.00
Related Products
Water cooling system printable STL files
Appart these files you need to also buy the other components from other sources, I reccomend Aliexpress, Ebay and Amazon as ease of access, but I can promise you if you are a good shopper there are many other sources online.You will print from the zip file you buy the followings; the lid holes patte..
£5.00 Ex Tax: £5.00
2.5 liters jar and pre drilled lid for water cooling system
Poly Propilene food grade 2.5 liters jar transparent.Polyethilene black lid with pre made holes to fit the water cooling system...
£14.00 Ex Tax: £10.00
3.5 liters jar and pre drilled lid for water cooling system
Poly Propilene food grade 3.5 liters jar transparent.Polyethilene black lid with pre made holes to fit the water cooling system...
£16.40 Ex Tax: £12.00
Hose stand with funnel for water DYI cooling system
Hoses bend, they chock and water is not passing anylonger, to prevent this you need a way to keep them straight in the most delicate sector, right above the lid.This version of stand has an integrated printed funnel you can use to top up water whenever it goes low (yes water evaporates, leaks and ye..
£3.00 Ex Tax: £3.00
Hose stand for water DYI cooling system
Hoses bend, they chock and water is not passing anylonger, to prevent this you need a way to keep them straight in the most delicate sector, right above the lid.For the price you have access to download the STL file that you can print yourself...
£3.00 Ex Tax: £3.00
The water jar and radiator support, 2.5 liters jar height
The old problem of keeping thigs together that led to creation of boxes, crates and other means, a water coling system has a reservoir (Jar) maybe a radiator, maybe a few fans on the radiator, some pumping system and pressure regulator.This system is here to act as a basket, keeping in the same plac..
£5.00 Ex Tax: £5.00
The water jar and radiator support, 3.5 liters jar height
The old problem of keeping thigs together that led to creation of boxes, crates and other means, a water coling system has a reservoir (Jar) maybe a radiator, maybe a few fans on the radiator, some pumping system and pressure regulator.This system is here to act as a basket, keeping in the s..
£5.00 Ex Tax: £5.00
Tags: 40mm fan, cooler support, water pump, 3D printing, water cooler, DYI, home improvements, upgrade