Z height probe mount
(you slide up and down the main mount with a screw to adjust) for most probe.
It is a Z axis sensor slider support adjustable as needed
to the micron of height by twisting a screw... Bye bye sensor adjusting
headache.
For
the price you have one Z height probe mount, it fits on the Main
Mount from beneath, and with a long M3 screw you can adjust it's height
as needed. The M3 by 60 bolt must be fitted with a M3 nyloc nut against
the main mount wth zero play, and in the Probe Mount you must TAP the hole for the bolt to go through for adjustments. You need to buy the M3 nuts and
bolts.
Word of advice from experience, PLA will fail in time due
to proximity of hot elements like heated bed or the hotend, but can
print in an open printer frame over 100 hours before it fails sometimes.
If
you intend to run your printer on the hot side of polymers do not go
for PLA, rather nylon, or PPS or similar, if you intend to go fully
enclosed and really hot polymers in printing, I reccomend you go PEI or
PEKK.
FLIP - Z height probe mount, fits B.L. Touch probes, 3D printed
- Brand: Maker
- Product Code: FLIP - Z height probe mount, fits B.L. Touch probes,
- Availability: In Stock
-
£6.80
- Ex Tax: £4.00
Available Options
Related Products
Flip main mount, left hand "Z" axis probe positioning; at 90 degrees, 3D printed
- Main mount (you bolt it on the printer carrier) 3 types of main mount , side probe position (left and right) front probe position (left or right) and no probe at all. Here is the main mount, left hand "Z" axis probe positioning; at 90 degrees.To be bolted on the machine carier you have, once..
£9.20 Ex Tax: £6.00
Flip main mount, left hand "Z" axis in front, 3D printed
- Main mount (you bolt it on the printer carrier) 3 types of main mount , side probe position (left and right) front probe position (left or right) and no probe at all. Here is the main mount, left hand "Z" axis probe positioning; at 90 degrees.To be bolted on the machine carier you have, once..
£9.20 Ex Tax: £6.00
Flip main mount, right hand "Z" axis in front, 3D printed
- Main mount (you bolt it on the printer carrier) 3 types of main mount , side probe position (left and right) front probe position (left or right) and no probe at all. Here is the main mount, right hand "Z" axis probe positioning; at 90 degrees.To be bolted on the machine carier you have, onc..
£9.20 Ex Tax: £6.00
Flip main mount, no "Z" axis probe, 3D printed
- Main mount (you bolt it on the printer carrier) 3 types of main mount , side probe position (left and right) front probe position (left or right) and no probe at all. Here is the main mount, no "Z" axis probe, this mount is for swapping a Z axis probe in place of the hotend before printing and..
£9.20 Ex Tax: £6.00
Flip, calibration mount tool, 3D printed.
- Fitting die calibration tool, this is like a main mount plus a lower flat surface so all your printing head mounts fit exactly in position, than you place the heatsink with heatbreak and nozzle on it and mark for the holes thus making shure your tool is on the exact height when changed on ..
£9.20 Ex Tax: £6.00
FLIP - Z height probe mount, can fit most probes, 3D printed
Z height probe mount (you slide up and down the main mount with a screw to adjust) for most probe.It is a Z axis sensor slider support adjustable as needed to the micron of height by twisting a screw... Bye bye sensor adjusting headache. For the price you have one Z height probe mount,..
£6.80 Ex Tax: £4.00
FLIP, V6 (or5) heatsink holder, 3D printed
V6 (or5) holder and the neck counter piece. To fit this you need 1 of M3 bolt long 15 mm and 2 M3 bolts long as per your measurment plus 2 nylock nuts. You also need washers, a 2mm drill bit to drill the main adapter at the corresponding hole in the piece holder, and an M3 tap to tap said ho..
£9.20 Ex Tax: £6.00
FLIP Universal Tools Holder, 3D printed on demand
Universal Tools Holder, For the price you have one Universal Tool Holder 3D printed. If you intend to run your printer on the hot side of polymers do not go for PLA, rather nylon, or PPS or similar, if you intend to go fully enclosed and really hot polymers in printing, I reccomend yo..
£8.00 Ex Tax: £5.00
FLIP Universal Extended Tools Holder, 3D printed on demand
Extended Universal Tools Holder, you can buy as many of them as you need, depending on how many different hotends you have to swap. It can mount Chimera, Water cooled heatsinks, and many other models.It is longer than the regular Universal Tools Holder, just in case you need to fit som..
£8.00 Ex Tax: £5.00
Tags: FLIP, Z height probe mount, Z probe, Z sensor, Z end stop, B. L. Touch, BLTouch,