The production of 3D printer filament is hindered by a few major limitations, one being the requirement of uninterrupted filament extrusion without any changes in temperature, speed, or pulling tensioner. To address this, an accumulation buffer mechanism is needed to store the produced filament until it is ready to be spooled.
This accumulation buffer has been tested for over three years and has proven to be highly effective, utilizing either gravity or motor synchronization. It is a nearly perfect fit for any cheap 3D printer filament production machine, whether it's a commercial or DIY setup.
the kit contains the STL files for
- One pulley accumulator wheel
- One pulley accumulator bushing
- One accumulator carrier
Filament accumulator kit
- Brand: 3D Mential
- Product Code: filament accumulator
- Availability: In Stock
-
£5.00
- Ex Tax: £5.00
Related Products
Filament spool support
My take on a filament spool support, accoding to how long is the Aluminium 20x20 extruded bar it can take quite a large number of filament spools from 500 grams to 1Kg to 3 Kg to 5 Kg, the rod that holds the spool is 6mm steel and on the rod there are 30mm or 50mm or 70mm drum adapters according to ..
£5.00 Ex Tax: £5.00
level winder and spooler kit for filament 1.75 mm for 3 Kg spool
If you need to extrude your own filament besides the extrusion machine, you will need to wind it nice and untangled, if you have tangled filament you will need to re-spool it untangled, if you have brittle annealed filament on a regular spool and keeps breaking in the Bowden tube, you ne..
£7.00 Ex Tax: £7.00
level winder and spooler kit for filament 1.75 mm for 1 Kg spool
If you need to extrude your own filament besides the extrusion machine, you will need to wind it nice and untangled, if you have tangled filament you will need to re-spool it untangled, if you have brittle annealed filament on a regular spool and keeps breaking in the Bowden tube, you ne..
£7.00 Ex Tax: £7.00
level winder (no spooler) kit for filament 1.75 mm for 3 Kg spool
level winder and spooler kitIf you need to extrude your own filament besides the extrusion machine, you will need to wind it nice and untangled, if you have tangled filament you will need to re-spool it untangled, if you have brittle annealed filament on a regular spool and keeps breakin..
£5.00 Ex Tax: £5.00
level winder (no spooler) kit for filament 1.75 mm for 1 Kg spool
level winder and spooler kitIf you need to extrude your own filament besides the extrusion machine, you will need to wind it nice and untangled, if you have tangled filament you will need to re-spool it untangled, if you have brittle annealed filament on a regular spool and keeps breakin..
£5.00 Ex Tax: £5.00
level winder (no spooler) kit for filament 3 mm for 3 Kg spool
level winder and spooler kitIf you need to extrude your own filament besides the extrusion machine, you will need to wind it nice and untangled, if you have tangled filament you will need to re-spool it untangled, if you have brittle annealed filament on a regular spool and keeps breakin..
£5.00 Ex Tax: £5.00
Tags: level winder, spooler kit, filament, 1.75 mm, 3 Kg spool, save the planet, climate change, plastic, filament accumulator, reuse, recycle, recycling, repurpose, make your own filament, extrude filament, recuperate plastic, clean the environment.