Search
Products meeting the search criteria
2.5 liters jar and pre drilled lid for water cooling system
Poly Propilene food grade 2.5 liters jar transparent.Polyethilene black lid with pre made holes to fit the water cooling system...
£14.00 Ex Tax: £10.00
3.5 liters jar and pre drilled lid for water cooling system
Poly Propilene food grade 3.5 liters jar transparent.Polyethilene black lid with pre made holes to fit the water cooling system...
£16.40 Ex Tax: £12.00
3D printed Ballerina line of multiaxis 3D printers turntable, for 200X200 printing bed
Ballerina is a turntable that rotates the printing bed ad infinite left and right as needed by the printer allowing the machine to print at any angle in any given position always against gravity, hence witout supports, powered by a closed loop stepper motor. The main purpose is to make..
£62.00 Ex Tax: £50.00
3D Printer suspensions leggs on tennis balls
Noise damper too. I went to see what it would cost me to have my printer more quiet while working, all that vibration on some Aluminium legs against the desk wood surface was acting like a guitar amplification effect, and the prices made me invent someting cheaper, those cups are held with ..
£3.00 Ex Tax: £3.00
3D Printer suspensions leggs on tennis balls 3D printed on demand
Noise damper too. I went to see what it would cost me to have my printer more quiet while working, all that vibration on some Aluminium legs against the desk wood surface was acting like a guitar amplification effect, and the prices made me invent someting cheaper, those cups are held with ..
£5.60 Ex Tax: £3.00
Ballerina line of multiaxis 3D printers turntable, for 200X200 printing bed
Ballerina is a turntable that rotates the printing bed ad infinite left and right as needed by the printer allowing the machine to print at any angle in any given position always against gravity, hence witout supports, powered by a closed loop stepper motor. The main purpose is to make..
£10.00 Ex Tax: £10.00
Filament spool support
My take on a filament spool support, accoding to how long is the Aluminium 20x20 extruded bar it can take quite a large number of filament spools from 500 grams to 1Kg to 3 Kg to 5 Kg, the rod that holds the spool is 6mm steel and on the rod there are 30mm or 50mm or 70mm drum adapters according to ..
£5.00 Ex Tax: £5.00
Filament spool support 3D printed
My take on a filament spool support, accoding to how long is the Aluminium 20x20 extruded bar it can take quite a large number of filament spools from 500 grams to 1Kg to 3 Kg to 5 Kg, the rod that holds the spool is 6mm steel and on the rod there are 30mm or 50mm or 70mm drum adapters acc..
£38.00 Ex Tax: £30.00
Flip main mount, left hand "Z" axis probe positioning; at 90 degrees, 3D printed
- Main mount (you bolt it on the printer carrier) 3 types of main mount , side probe position (left and right) front probe position (left or right) and no probe at all. Here is the main mount, left hand "Z" axis probe positioning; at 90 degrees.To be bolted on the machine carier you have, once..
£9.20 Ex Tax: £6.00
Flip Automated tool Changer
Swapping the print head is a mess, wires, screws, nuts, bolts, carriage, all taken apart, one day of work just to swap a Chimera for a Volcano, and this is before you go into the firmware settings.It doesn't have to be that way.You can have the easy life after you printed this light and compact..
£5.00 Ex Tax: £5.00
Flip main mount, left hand "Z" axis in front, 3D printed
- Main mount (you bolt it on the printer carrier) 3 types of main mount , side probe position (left and right) front probe position (left or right) and no probe at all. Here is the main mount, left hand "Z" axis probe positioning; at 90 degrees.To be bolted on the machine carier you have, once..
£9.20 Ex Tax: £6.00
Flip main mount, no "Z" axis probe, 3D printed
- Main mount (you bolt it on the printer carrier) 3 types of main mount , side probe position (left and right) front probe position (left or right) and no probe at all. Here is the main mount, no "Z" axis probe, this mount is for swapping a Z axis probe in place of the hotend before printing and..
£9.20 Ex Tax: £6.00
Flip main mount, right hand "Z" axis in front, 3D printed
- Main mount (you bolt it on the printer carrier) 3 types of main mount , side probe position (left and right) front probe position (left or right) and no probe at all. Here is the main mount, right hand "Z" axis probe positioning; at 90 degrees.To be bolted on the machine carier you have, onc..
£9.20 Ex Tax: £6.00
Flip main mount, right hand "Z" axis probe positioning; at 90 degrees, 3D printed
- Main mount (you bolt it on the printer carrier) 3 types of main mount , side probe position (left and right) front probe position (left or right) and no probe at all. Here is the main mount, right hand "Z" axis probe positioning; at 90 degrees.To be bolted on the machine carier you have, onc..
£9.20 Ex Tax: £6.00
FLIP Universal Extended Tools Holder, 3D printed on demand
Extended Universal Tools Holder, you can buy as many of them as you need, depending on how many different hotends you have to swap. It can mount Chimera, Water cooled heatsinks, and many other models.It is longer than the regular Universal Tools Holder, just in case you need to fit som..
£8.00 Ex Tax: £5.00