Search
Products meeting the search criteria
3D printed Ballerina line of multiaxis 3D printers turntable, for 200X200 printing bed
Ballerina is a turntable that rotates the printing bed ad infinite left and right as needed by the printer allowing the machine to print at any angle in any given position always against gravity, hence witout supports, powered by a closed loop stepper motor. The main purpose is to make..
£62.00 Ex Tax: £50.00
Ballerina line of multiaxis 3D printers turntable, for 200X200 printing bed
Ballerina is a turntable that rotates the printing bed ad infinite left and right as needed by the printer allowing the machine to print at any angle in any given position always against gravity, hence witout supports, powered by a closed loop stepper motor. The main purpose is to make..
£10.00 Ex Tax: £10.00
CNC probing tool
A CNC probe is pretty darn expensive, a few hundred of USD, and for a reason, they do a great job, they are pretty finicky things to make, they last for ever (or until you crush them by mistake because you forgot to plug their cable in before launching the cycle) Now you can 3D print your own C..
£5.00 Ex Tax: £5.00
Flip Automated tool Changer
Swapping the print head is a mess, wires, screws, nuts, bolts, carriage, all taken apart, one day of work just to swap a Chimera for a Volcano, and this is before you go into the firmware settings.It doesn't have to be that way.You can have the easy life after you printed this light and compact..
£5.00 Ex Tax: £5.00
Mini Z axis; top down carrier
This project can be used for many 3D printers based on Core X,Y, systems and similar gantry systems that have the Z axis on the printing bed and the X and Y axis on a top gantry that does not perform Z axis movements.Truth is that when you want to print Non Planar sliced geometries thre is a limitat..
£5.00 Ex Tax: £5.00
Multi-axis calibration mapping probe
Normally a calibration probe for Z axis is enough for 3D printer, be it a magnetic sensor, a hall probe like BL touch or a simple switch that clicks at touch. Not true when you work in 5 axis, your bed tilts, and needs calibration mapping before every print individually. That is another beast ..
£5.00 Ex Tax: £5.00
Rumba 5 axis platform 200X200 3D printed on demand
Rumba it consists of a printing bed on 3 Z screw raisers that work indipendently not only to find the perfect bed alignment with the nozzle each print automatically, but also to tilt the print up to 40 degrees in any direction helping thus with printing without supports if you manage to get your..
£122.00 Ex Tax: £100.00
Rumba 5 axis platform, 200x200 printing bed size (can take also up to 300X300 mm printing bed size)
Rumba it consists of a printing bed on 3 Z screw raisers that work indipendently not only to find the perfect bed alignment with the nozzle each print automatically, but also to tilt the print up to 40 degrees in any direction helping thus with printing without supports if you manage to get your..
£10.00 Ex Tax: £10.00
Z axis rod drop down bearing supports for 8mm threaded studs
Many cheap 3 d printers have the Z axis climbing up and down on threaded rods, one end (usually the bottome one) attached to the stepper motor, the other one.... free to wobble.And this causes some issues with the printing process.Locking the other end from wobbling is something that actually improv..
£5.00 Ex Tax: £5.00