V6 (or5) holder and the neck counter piece. To fit this
you need 1 of M3 bolt long 15 mm and 2 M3 bolts long as per your
measurment plus 2 nylock nuts. You also need washers, a 2mm drill bit to
drill the main adapter at the corresponding hole in the piece holder,
and an M3 tap to tap said ho..
Horizontal and vertical sucking funnel for 40mm up to 80 mm fan to cool a V6
heatsink so I can print Policarbonate carbon fiber filament at 270C, if
this is not good enough. The point is I am printing with a cheap Core
XY or gantry printer and went to print around 300C, Polycarbonate and simil..
