Search
Products meeting the search criteria
Flip main mount, left hand "Z" axis probe positioning; at 90 degrees, 3D printed
- Main mount (you bolt it on the printer carrier) 3 types of main mount , side probe position (left and right) front probe position (left or right) and no probe at all. Here is the main mount, left hand "Z" axis probe positioning; at 90 degrees.To be bolted on the machine carier you have, once..
£9.20 Ex Tax: £6.00
Flip Automated tool Changer
Swapping the print head is a mess, wires, screws, nuts, bolts, carriage, all taken apart, one day of work just to swap a Chimera for a Volcano, and this is before you go into the firmware settings.It doesn't have to be that way.You can have the easy life after you printed this light and compact..
£5.00 Ex Tax: £5.00
Flip main mount, left hand "Z" axis in front, 3D printed
- Main mount (you bolt it on the printer carrier) 3 types of main mount , side probe position (left and right) front probe position (left or right) and no probe at all. Here is the main mount, left hand "Z" axis probe positioning; at 90 degrees.To be bolted on the machine carier you have, once..
£9.20 Ex Tax: £6.00
Flip main mount, no "Z" axis probe, 3D printed
- Main mount (you bolt it on the printer carrier) 3 types of main mount , side probe position (left and right) front probe position (left or right) and no probe at all. Here is the main mount, no "Z" axis probe, this mount is for swapping a Z axis probe in place of the hotend before printing and..
£9.20 Ex Tax: £6.00
Flip main mount, right hand "Z" axis in front, 3D printed
- Main mount (you bolt it on the printer carrier) 3 types of main mount , side probe position (left and right) front probe position (left or right) and no probe at all. Here is the main mount, right hand "Z" axis probe positioning; at 90 degrees.To be bolted on the machine carier you have, onc..
£9.20 Ex Tax: £6.00
Flip main mount, right hand "Z" axis probe positioning; at 90 degrees, 3D printed
- Main mount (you bolt it on the printer carrier) 3 types of main mount , side probe position (left and right) front probe position (left or right) and no probe at all. Here is the main mount, right hand "Z" axis probe positioning; at 90 degrees.To be bolted on the machine carier you have, onc..
£9.20 Ex Tax: £6.00
Flip, calibration mount tool, 3D printed.
- Fitting die calibration tool, this is like a main mount plus a lower flat surface so all your printing head mounts fit exactly in position, than you place the heatsink with heatbreak and nozzle on it and mark for the holes thus making shure your tool is on the exact height when changed on ..
£9.20 Ex Tax: £6.00
FLIP, the cheap reliable tested tools swap system by hand.
Swapping the print head is a mess, wires, screws, nuts, bolts, carriage, all taken apart, one day of work just to swap a Chimera for a Volcano, and this is before you go into the firmware settings.It doesn't have to be that way.You can have the easy life after you printed this light and compact..
£5.00 Ex Tax: £5.00
Multi-axis calibration mapping probe
Normally a calibration probe for Z axis is enough for 3D printer, be it a magnetic sensor, a hall probe like BL touch or a simple switch that clicks at touch. Not true when you work in 5 axis, your bed tilts, and needs calibration mapping before every print individually. That is another beast ..
£5.00 Ex Tax: £5.00
The water jar and radiator support, 2.5 liters jar height
The old problem of keeping thigs together that led to creation of boxes, crates and other means, a water coling system has a reservoir (Jar) maybe a radiator, maybe a few fans on the radiator, some pumping system and pressure regulator.This system is here to act as a basket, keeping in the same plac..
£5.00 Ex Tax: £5.00
The water jar and radiator support, 3.5 liters jar height
The old problem of keeping thigs together that led to creation of boxes, crates and other means, a water coling system has a reservoir (Jar) maybe a radiator, maybe a few fans on the radiator, some pumping system and pressure regulator.This system is here to act as a basket, keeping in the s..
£5.00 Ex Tax: £5.00
Water cooling system printable STL files
Appart these files you need to also buy the other components from other sources, I reccomend Aliexpress, Ebay and Amazon as ease of access, but I can promise you if you are a good shopper there are many other sources online.You will print from the zip file you buy the followings; the lid holes patte..
£5.00 Ex Tax: £5.00
Water jar and radiator support, 2.5 liters jar height, 3D printed
The old problem of keeping thigs together that led to creation of boxes, crates and other means, a water coling system has a reservoir (Jar) maybe a radiator, maybe a few fans on the radiator, some pumping system and pressure regulator.This system is here to act as a basket, keeping in the sam..
£16.40 Ex Tax: £12.00
Water jar and radiator support, 3.5 liters jar height, 3D printed
The old problem of keeping thigs together that led to creation of boxes, crates and other means, a water coling system has a reservoir (Jar) maybe a radiator, maybe a few fans on the radiator, some pumping system and pressure regulator.This system is here to act as a basket, keeping in the s..
£20.00 Ex Tax: £15.00