Search
Products meeting the search criteria
Flip main mount, left hand "Z" axis probe positioning; at 90 degrees, 3D printed
- Main mount (you bolt it on the printer carrier) 3 types of main mount , side probe position (left and right) front probe position (left or right) and no probe at all. Here is the main mount, left hand "Z" axis probe positioning; at 90 degrees.To be bolted on the machine carier you have, once..
£9.20 Ex Tax: £6.00
Flip Automated tool Changer
Swapping the print head is a mess, wires, screws, nuts, bolts, carriage, all taken apart, one day of work just to swap a Chimera for a Volcano, and this is before you go into the firmware settings.It doesn't have to be that way.You can have the easy life after you printed this light and compact..
£5.00 Ex Tax: £5.00
Flip main mount, left hand "Z" axis in front, 3D printed
- Main mount (you bolt it on the printer carrier) 3 types of main mount , side probe position (left and right) front probe position (left or right) and no probe at all. Here is the main mount, left hand "Z" axis probe positioning; at 90 degrees.To be bolted on the machine carier you have, once..
£9.20 Ex Tax: £6.00
Flip main mount, no "Z" axis probe, 3D printed
- Main mount (you bolt it on the printer carrier) 3 types of main mount , side probe position (left and right) front probe position (left or right) and no probe at all. Here is the main mount, no "Z" axis probe, this mount is for swapping a Z axis probe in place of the hotend before printing and..
£9.20 Ex Tax: £6.00
Flip main mount, right hand "Z" axis in front, 3D printed
- Main mount (you bolt it on the printer carrier) 3 types of main mount , side probe position (left and right) front probe position (left or right) and no probe at all. Here is the main mount, right hand "Z" axis probe positioning; at 90 degrees.To be bolted on the machine carier you have, onc..
£9.20 Ex Tax: £6.00
Flip main mount, right hand "Z" axis probe positioning; at 90 degrees, 3D printed
- Main mount (you bolt it on the printer carrier) 3 types of main mount , side probe position (left and right) front probe position (left or right) and no probe at all. Here is the main mount, right hand "Z" axis probe positioning; at 90 degrees.To be bolted on the machine carier you have, onc..
£9.20 Ex Tax: £6.00
FLIP Universal Extended Tools Holder, 3D printed on demand
Extended Universal Tools Holder, you can buy as many of them as you need, depending on how many different hotends you have to swap. It can mount Chimera, Water cooled heatsinks, and many other models.It is longer than the regular Universal Tools Holder, just in case you need to fit som..
£8.00 Ex Tax: £5.00
FLIP Universal Tools Holder, 3D printed on demand
Universal Tools Holder, For the price you have one Universal Tool Holder 3D printed. If you intend to run your printer on the hot side of polymers do not go for PLA, rather nylon, or PPS or similar, if you intend to go fully enclosed and really hot polymers in printing, I reccomend yo..
£8.00 Ex Tax: £5.00
Flip, calibration mount tool, 3D printed.
- Fitting die calibration tool, this is like a main mount plus a lower flat surface so all your printing head mounts fit exactly in position, than you place the heatsink with heatbreak and nozzle on it and mark for the holes thus making shure your tool is on the exact height when changed on ..
£9.20 Ex Tax: £6.00
FLIP, the cheap reliable tested tools swap system by hand.
Swapping the print head is a mess, wires, screws, nuts, bolts, carriage, all taken apart, one day of work just to swap a Chimera for a Volcano, and this is before you go into the firmware settings.It doesn't have to be that way.You can have the easy life after you printed this light and compact..
£5.00 Ex Tax: £5.00
FLIP, V6 (or5) heatsink holder, 3D printed
V6 (or5) holder and the neck counter piece. To fit this you need 1 of M3 bolt long 15 mm and 2 M3 bolts long as per your measurment plus 2 nylock nuts. You also need washers, a 2mm drill bit to drill the main adapter at the corresponding hole in the piece holder, and an M3 tap to tap said ho..
£9.20 Ex Tax: £6.00
Multi-axis calibration mapping probe
Normally a calibration probe for Z axis is enough for 3D printer, be it a magnetic sensor, a hall probe like BL touch or a simple switch that clicks at touch. Not true when you work in 5 axis, your bed tilts, and needs calibration mapping before every print individually. That is another beast ..
£5.00 Ex Tax: £5.00