3D Mential
2.5 liters jar and pre drilled lid for water cooling system
Poly Propilene food grade 2.5 liters jar transparent.Polyethilene black lid with pre made holes to fit the water cooling system...
£14.00 Ex Tax: £10.00
3.5 liters jar and pre drilled lid for water cooling system
Poly Propilene food grade 3.5 liters jar transparent.Polyethilene black lid with pre made holes to fit the water cooling system...
£16.40 Ex Tax: £12.00
30mm fan cooler support for water pump outer diameter 27mm to 30mm
Water pumps run on electric motors and their cooling system is far from enough if the pump runs for 24 hours a day a few days to finish a big print. This shroud helps fitting a 30mm fan to blow against pump body improving cooling, besides the cupola has provisions to pass the wires in to conne..
£2.00 Ex Tax: £2.00
3D Printer suspensions leggs on tennis balls
Noise damper too. I went to see what it would cost me to have my printer more quiet while working, all that vibration on some Aluminium legs against the desk wood surface was acting like a guitar amplification effect, and the prices made me invent someting cheaper, those cups are held with ..
£3.00 Ex Tax: £3.00
3D Printers 20x20 Aluminium profile building elements
Struggling to align your 3D printer 20X20 Aluminium profile frame, keep it in square, and in the same time not have the frame corners clogged by connectors that limit your gantry travel by 25mm at each end reducing your printing area wiht 50mm is hard.But it does not have to be hard, so ..
£5.00 Ex Tax: £5.00
40mm single fan cooler support for water pump outer diameter 27mm to 30mm
Water pumps run on electric motors and their cooling system is far from enough if the pump runs for 24 hours a day a few days to finish a big print. This shroud helps fitting a 40mm fan to blow against pump body improving cooling, besides the cupola has provisions to pass the wires in ..
£3.00 Ex Tax: £3.00
40mm twin fan cooler support for water pump outer diameter 27mm to 30mm
Water pumps run on electric motors and their cooling system is far from enough if the pump runs for 24 hours a day a few days to finish a big print. This shroud helps fitting a 40mm fan to blow against pump body improving cooling, besides the cupola has provisions to pass the wires in ..
£2.00 Ex Tax: £2.00
Ballerina line of multiaxis 3D printers turntable, for 200X200 printing bed
Ballerina is a turntable that rotates the printing bed ad infinite left and right as needed by the printer allowing the machine to print at any angle in any given position always against gravity, hence witout supports, powered by a closed loop stepper motor. The main purpose is to make..
£10.00 Ex Tax: £10.00
Building your ultralight flight machine
This book is not perfect, never shall become so, I accept any suggestions and constructive criticism.From the cycle “mind your own business”Building your ultralight flight machine is easy.Understanding what you are doing it is not easy thou!Neither finding the money to do it.!In this works I do not ..
£5.00 Ex Tax: £5.00
Clamp spinning handle
As from the name this is a clamping up spinning handle that can pretty much clamp against anything you need to spin like a cable reel, filament spool, etc.In the ZIP file you have one lower element, one upper element, one handle pipe and one nut knob, for which you need to buy a kerneled M5 inse..
£3.00 Ex Tax: £3.00
CNC probing tool
A CNC probe is pretty darn expensive, a few hundred of USD, and for a reason, they do a great job, they are pretty finicky things to make, they last for ever (or until you crush them by mistake because you forgot to plug their cable in before launching the cycle) Now you can 3D print your own C..
£5.00 Ex Tax: £5.00
Door handle
Like most of my drawings it came out of necesity. This one is my first CAD drawing made to suit a client needs in FreeCad, namely my friends that fitted a new door lock at their garden fence and when Amazon deliverd their order of 6 folded wooden chairs IKEA style packed, the driver tossed it ..
£2.00 Ex Tax: £2.00
Extrusion line filament tensioner for perfect diameter of filament.
The tensioner spool machine is a dual gear puller where one of the axis is powered and the other axis is taking the power from the dual gear system. Once printed you will need to fill the pulleys with Structural Silicone (Glue Sealant) up to the level of the geared teeth, than let it cure a ..
£5.00 Ex Tax: £5.00
Filament accumulator kit
The production of 3D printer filament is hindered by a few major limitations, one being the requirement of uninterrupted filament extrusion without any changes in temperature, speed, or pulling tensioner. To address this, an accumulation buffer mechanism is needed to store the produced filament ..
£5.00 Ex Tax: £5.00
Filament spool support
My take on a filament spool support, accoding to how long is the Aluminium 20x20 extruded bar it can take quite a large number of filament spools from 500 grams to 1Kg to 3 Kg to 5 Kg, the rod that holds the spool is 6mm steel and on the rod there are 30mm or 50mm or 70mm drum adapters according to ..
£5.00 Ex Tax: £5.00