- Main mount (you bolt it on the printer carrier) 3 types of main mount , side probe position (left and right) front probe position (left or right) and no probe at all. Here is the main mount, no "Z" axis probe, this mount is for swapping a Z axis probe in place of the hotend before printing and flipping them back to hotend after probing to print.
To be bolted on the machine carier you have, once and for good, depending on your machine you will have to figure out alone what you need in therms of nuts and bolts and how to do it (might imply some drilling and threading in the carrier or in the main mount 3D printed part).

For the price you have one  main mount, no "Z" axis probe.   You need to buy the M4 or M3 nuts and bolts.

Word of advice from experience, PLA will fail in time due to proximity of hot elements like heated bed or the hotend, but can print in an open printer frame over 100 hours before it fails sometimes.

If you intend to run your printer on the hot side of polymers do not go for PLA, rather nylon, or PPS or similar, if you intend to go fully enclosed and really hot polymers in printing, I reccomend you go PEI or PEKK.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Flip main mount, no "Z" axis probe, 3D printed

  • Brand: Maker
  • Product Code: Flip main mount, no "Z" axis probe
  • Availability: In Stock
  • £9.20

  • Ex Tax: £6.00

Available Options


Related Products

Flip, calibration mount tool, 3D printed.

Flip, calibration mount tool, 3D printed.

- Fitting die calibration tool, this is like a main mount plus a lower flat surface so all your printing head mounts fit exactly in position, than you place the heatsink with heatbreak and nozzle on it and mark for the holes thus making shure your tool is on the exact height when changed on ..

£9.20 Ex Tax: £6.00

FLIP - Z height probe mount,  can fit most probes, 3D printed

FLIP - Z height probe mount, can fit most probes, 3D printed

Z height probe mount (you slide up and down the main mount with a screw to adjust)  for most probe.It is a Z axis sensor slider support adjustable as needed to the micron of height by twisting a screw... Bye bye sensor adjusting headache. For the price you have one Z height probe mount,..

£6.80 Ex Tax: £4.00

FLIP - Z height probe mount, fits B.L. Touch probes, 3D printed

FLIP - Z height probe mount, fits B.L. Touch probes, 3D printed

Z height probe mount (you slide up and down the main mount with a screw to adjust)  for most probe.It is a Z axis sensor slider support adjustable as needed to the micron of height by twisting a screw... Bye bye sensor adjusting headache. For the price you have one Z height probe mount,..

£6.80 Ex Tax: £4.00

FLIP, V6 (or5) heatsink holder, 3D printed

FLIP, V6 (or5) heatsink holder, 3D printed

V6 (or5) holder and the neck counter piece. To fit this you need 1 of M3 bolt long 15 mm and 2 M3 bolts long as per your measurment plus 2 nylock nuts. You also need washers, a 2mm drill bit to drill the main adapter at the corresponding hole in the piece holder, and an M3 tap to tap said ho..

£9.20 Ex Tax: £6.00

FLIP Universal Tools Holder, 3D printed on demand

FLIP Universal Tools Holder, 3D printed on demand

Universal Tools Holder, For the price you have one  Universal Tool Holder 3D printed. If you intend to run your printer on the hot side of polymers do not go for PLA, rather nylon, or PPS or similar, if you intend to go fully enclosed and really hot polymers in printing, I reccomend yo..

£8.00 Ex Tax: £5.00

FLIP Universal Extended Tools Holder, 3D printed on demand

FLIP Universal Extended Tools Holder, 3D printed on demand

Extended Universal Tools Holder, you can buy as many of them as you need, depending on how many different hotends you have to swap.  It can mount Chimera, Water cooled heatsinks, and many other models.It is longer than the regular Universal Tools Holder, just in case you need to fit  som..

£8.00 Ex Tax: £5.00

Tags: Flip, tool swap, assembly for cheap 3D printers, STL files, printable files, main mount