V6 (or5) holder and the neck counter piece. To fit this you need 1 of M3 bolt long 15 mm and 2 M3 bolts long as per your measurment plus 2 nylock nuts. You also need washers, a 2mm drill bit to drill the main adapter at the corresponding hole in the piece holder, and an M3 tap to tap said hole you made in the Main Holder, just to lock in place the piece adapters there.

To fit the V6, slide ther Main Holder onto the Calibration die holder, lock it with a bolt to the calibration die holder, fit the neck of the V6 (or5) in position such that the tip of the nozzle beary touches the calibration base lip, if it siths on it than adjust the height of the nozzle or the throat in the heatsink till you reach perfection, than place the counterpart over the neck and lock it in position, unscrew the calibration locking bolt, remove the holder and is ready to be placed on your printer.


For the price you have one  V6 (or5) mount and the counterpart to hold the neck fixed.   You need to buy the M3 nuts and bolts.

Word of advice from experience, PLA will fail in time due to proximity of hot elements like heated bed or the hotend, but can print in an open printer frame over 100 hours before it fails sometimes.

If you intend to run your printer on the hot side of polymers do not go for PLA, rather nylon, or PPS or similar, if you intend to go fully enclosed and really hot polymers in printing, I reccomend you go PEI or PEKK.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

FLIP, V6 (or5) heatsink holder, 3D printed

  • Brand: Maker
  • Product Code: V6 (or5) heatsink holder
  • Availability: In Stock
  • £9.20

  • Ex Tax: £6.00

Available Options


Related Products

Flip  main mount, left hand "Z" axis probe positioning; at 90 degrees, 3D printed

Flip main mount, left hand "Z" axis probe positioning; at 90 degrees, 3D printed

- Main mount (you bolt it on the printer carrier) 3 types of main mount , side probe position (left and right) front probe position (left or right) and no probe at all. Here is the main mount, left hand "Z" axis probe positioning; at 90 degrees.To be bolted on the machine carier you have, once..

£9.20 Ex Tax: £6.00

Flip main mount, right hand "Z" axis probe positioning; at 90 degrees, 3D printed

Flip main mount, right hand "Z" axis probe positioning; at 90 degrees, 3D printed

- Main mount (you bolt it on the printer carrier) 3 types of main mount , side probe position (left and right) front probe position (left or right) and no probe at all. Here is the main mount, right hand "Z" axis probe positioning; at 90 degrees.To be bolted on the machine carier you have, onc..

£9.20 Ex Tax: £6.00

Flip main mount, left hand "Z" axis in front, 3D printed

Flip main mount, left hand "Z" axis in front, 3D printed

- Main mount (you bolt it on the printer carrier) 3 types of main mount , side probe position (left and right) front probe position (left or right) and no probe at all. Here is the main mount, left hand "Z" axis probe positioning; at 90 degrees.To be bolted on the machine carier you have, once..

£9.20 Ex Tax: £6.00

Flip main mount, right hand "Z" axis in front, 3D printed

Flip main mount, right hand "Z" axis in front, 3D printed

- Main mount (you bolt it on the printer carrier) 3 types of main mount , side probe position (left and right) front probe position (left or right) and no probe at all. Here is the main mount, right hand "Z" axis probe positioning; at 90 degrees.To be bolted on the machine carier you have, onc..

£9.20 Ex Tax: £6.00

Flip main mount, no "Z" axis probe, 3D printed

Flip main mount, no "Z" axis probe, 3D printed

- Main mount (you bolt it on the printer carrier) 3 types of main mount , side probe position (left and right) front probe position (left or right) and no probe at all. Here is the main mount, no "Z" axis probe, this mount is for swapping a Z axis probe in place of the hotend before printing and..

£9.20 Ex Tax: £6.00

FLIP - Z height probe mount,  can fit most probes, 3D printed

FLIP - Z height probe mount, can fit most probes, 3D printed

Z height probe mount (you slide up and down the main mount with a screw to adjust)  for most probe.It is a Z axis sensor slider support adjustable as needed to the micron of height by twisting a screw... Bye bye sensor adjusting headache. For the price you have one Z height probe mount,..

£6.80 Ex Tax: £4.00

FLIP - Z height probe mount, fits B.L. Touch probes, 3D printed

FLIP - Z height probe mount, fits B.L. Touch probes, 3D printed

Z height probe mount (you slide up and down the main mount with a screw to adjust)  for most probe.It is a Z axis sensor slider support adjustable as needed to the micron of height by twisting a screw... Bye bye sensor adjusting headache. For the price you have one Z height probe mount,..

£6.80 Ex Tax: £4.00

FLIP Universal Tools Holder, 3D printed on demand

FLIP Universal Tools Holder, 3D printed on demand

Universal Tools Holder, For the price you have one  Universal Tool Holder 3D printed. If you intend to run your printer on the hot side of polymers do not go for PLA, rather nylon, or PPS or similar, if you intend to go fully enclosed and really hot polymers in printing, I reccomend yo..

£8.00 Ex Tax: £5.00

FLIP Universal Extended Tools Holder, 3D printed on demand

FLIP Universal Extended Tools Holder, 3D printed on demand

Extended Universal Tools Holder, you can buy as many of them as you need, depending on how many different hotends you have to swap.  It can mount Chimera, Water cooled heatsinks, and many other models.It is longer than the regular Universal Tools Holder, just in case you need to fit  som..

£8.00 Ex Tax: £5.00

Tags: V6 (or5) heatsink holder, flip tool swap, heatsink, v6 heatsink, v5 heatsink,