Universal Tools Holder,
For the price you have one Universal Tool Holder 3D printed.
If
you intend to run your printer on the hot side of polymers do not go
for PLA, rather nylon, or PPS or similar, if you intend to go fully
enclosed and really hot polymers in printing, I reccomend you go PEI or
PEKK.
FLIP Universal Tools Holder, 3D printed on demand
- Brand: Maker
- Product Code: FLIP Universal Tools Holder
- Availability: In Stock
-
£8.00
- Ex Tax: £5.00
Available Options
Related Products
Flip main mount, left hand "Z" axis probe positioning; at 90 degrees, 3D printed
- Main mount (you bolt it on the printer carrier) 3 types of main mount , side probe position (left and right) front probe position (left or right) and no probe at all. Here is the main mount, left hand "Z" axis probe positioning; at 90 degrees.To be bolted on the machine carier you have, once..
£9.20 Ex Tax: £6.00
Flip main mount, left hand "Z" axis in front, 3D printed
- Main mount (you bolt it on the printer carrier) 3 types of main mount , side probe position (left and right) front probe position (left or right) and no probe at all. Here is the main mount, left hand "Z" axis probe positioning; at 90 degrees.To be bolted on the machine carier you have, once..
£9.20 Ex Tax: £6.00
Flip main mount, right hand "Z" axis in front, 3D printed
- Main mount (you bolt it on the printer carrier) 3 types of main mount , side probe position (left and right) front probe position (left or right) and no probe at all. Here is the main mount, right hand "Z" axis probe positioning; at 90 degrees.To be bolted on the machine carier you have, onc..
£9.20 Ex Tax: £6.00
Flip main mount, no "Z" axis probe, 3D printed
- Main mount (you bolt it on the printer carrier) 3 types of main mount , side probe position (left and right) front probe position (left or right) and no probe at all. Here is the main mount, no "Z" axis probe, this mount is for swapping a Z axis probe in place of the hotend before printing and..
£9.20 Ex Tax: £6.00
Flip, calibration mount tool, 3D printed.
- Fitting die calibration tool, this is like a main mount plus a lower flat surface so all your printing head mounts fit exactly in position, than you place the heatsink with heatbreak and nozzle on it and mark for the holes thus making shure your tool is on the exact height when changed on ..
£9.20 Ex Tax: £6.00
FLIP - Z height probe mount, can fit most probes, 3D printed
Z height probe mount (you slide up and down the main mount with a screw to adjust) for most probe.It is a Z axis sensor slider support adjustable as needed to the micron of height by twisting a screw... Bye bye sensor adjusting headache. For the price you have one Z height probe mount,..
£6.80 Ex Tax: £4.00
FLIP - Z height probe mount, fits B.L. Touch probes, 3D printed
Z height probe mount (you slide up and down the main mount with a screw to adjust) for most probe.It is a Z axis sensor slider support adjustable as needed to the micron of height by twisting a screw... Bye bye sensor adjusting headache. For the price you have one Z height probe mount,..
£6.80 Ex Tax: £4.00
FLIP, V6 (or5) heatsink holder, 3D printed
V6 (or5) holder and the neck counter piece. To fit this you need 1 of M3 bolt long 15 mm and 2 M3 bolts long as per your measurment plus 2 nylock nuts. You also need washers, a 2mm drill bit to drill the main adapter at the corresponding hole in the piece holder, and an M3 tap to tap said ho..
£9.20 Ex Tax: £6.00
Tags: FLIP, Universal Tools Holder, tool swap, 3D printer, DYI, upgrade,