• 3.5 liters jar and pre drilled lid for water cooling system

Poly Propilene food grade 3.5 liters jar transparent.
Polyethilene black lid with pre made holes to fit the water cooling system.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

3.5 liters jar and pre drilled lid for water cooling system

  • Brand: 3D Mential
  • Product Code: 3.5 liters jar and pre drilled lid for water cooling
  • Availability: In Stock
  • £16.40

  • Ex Tax: £12.00

Related Products

Water cooling system printable STL files

Water cooling system printable STL files

Appart these files you need to also buy the other components from other sources, I reccomend Aliexpress, Ebay and Amazon as ease of access, but I can promise you if you are a good shopper there are many other sources online.You will print from the zip file you buy the followings; the lid holes patte..

£5.00 Ex Tax: £5.00

funel; top OD 65mm ID 63mm to neck OD 14 mm ID 10mm

funel; top OD 65mm ID 63mm to neck OD 14 mm ID 10mm

When it comes to commerically available funnels there is a wide variety that fits the majority needs.I am a minority and have special needs when it comes to funels.This one fits a version of the water cooling system top up needs on the top of the jar lid between all the cables, hoses, taps, pumps an..

£2.00 Ex Tax: £2.00

Tools holding jar 40mm outer diameter, 4mm honeycomb spacing.

Tools holding jar 40mm outer diameter, 4mm honeycomb spacing.

We cover here three heights of the same diameter jar with the same honeycomb spacing H 25mm mainly for mini dremel bitsH 50mm mainly for larger head bits and longer flute tols like tapping tools and drill bitsH 80mm mainly for long thin tools like thin screwdrivers, punchers and twizzers, also some ..

£3.00 Ex Tax: £3.00

Tools holding jar 60mm outer diameter, 6mm honeycomb spacing.

Tools holding jar 60mm outer diameter, 6mm honeycomb spacing.

We cover here three heights of the same diameter jar with the same honeycomb spacing H 25mm mainly for mini router bitsH 50mm mainly for larger head bits and longer flute tols like tapping tools and drill bitsH 75mm mainly for long thin tools like screwdrivers, punchers and twizzers, allen keys an..

£3.00 Ex Tax: £3.00

Tools holding jar 80mm outer diameter, 8mm honeycomb spacing.

Tools holding jar 80mm outer diameter, 8mm honeycomb spacing.

We cover here three heights of the same diameter jar with the same honeycomb spacing H 25mm mainly for router bits, beveling tools, etc.H 50mm mainly for larger head bits and longer flute tols like tapping tools and drill bits,handled tools like tapping handle or chuck keys.H 100mm mainly for long&n..

£3.00 Ex Tax: £3.00

Tools holding jar 120mm outer diameter, 12mm honeycomb spacing.

Tools holding jar 120mm outer diameter, 12mm honeycomb spacing.

We cover here three heights of the same diameter jar with the same honeycomb spacing H 50mm mainly for router bits, beveling tools, etc.H 75mm mainly for larger head bits and longer flute tols like tapping tools and drill bits,handled tools like tapping handle or chuck keys.H 100mm mainly for long..

£3.00 Ex Tax: £3.00

Tools holding jar 160mm outer diameter, 16mm honeycomb spacing.

Tools holding jar 160mm outer diameter, 16mm honeycomb spacing.

H 50mm mainly short thick for router bits, beveling tools, etc.H 100mm mainly for larger head bits and longer flute tols like tapping tools and drill bits, handled tools like tapping handle or chuck keys, pliers, snip, clippers, and other wrenches.H 150mm mainly for long  tools like big scr..

£3.00 Ex Tax: £3.00

Hose stand with funnel for water DYI cooling system

Hose stand with funnel for water DYI cooling system

Hoses bend, they chock and water is not passing anylonger, to prevent this you need a way to keep them straight in the most delicate sector, right above the lid.This version of stand has an integrated printed funnel you can use to top up water whenever it goes low (yes water evaporates, leaks and ye..

£3.00 Ex Tax: £3.00

30mm fan cooler support for water pump outer diameter 27mm to 30mm

30mm fan cooler support for water pump outer diameter 27mm to 30mm

Water pumps run on electric motors and their cooling system is far from enough if the pump runs for 24 hours a day a few days to finish a big print.  This shroud helps fitting a 30mm fan to blow against pump body improving cooling, besides the cupola has provisions to pass the wires in to conne..

£2.00 Ex Tax: £2.00

40mm twin fan cooler support for water pump outer diameter 27mm to 30mm

40mm twin fan cooler support for water pump outer diameter 27mm to 30mm

Water pumps run on electric motors and their cooling system is far from enough if the pump runs for 24 hours a day a few days to finish a big print.  This shroud helps fitting a 40mm fan to blow against pump body improving cooling, besides the cupola has provisions to pass the wires in ..

£2.00 Ex Tax: £2.00

The water jar and radiator support, 3.5 liters jar height

The water jar and radiator support, 3.5 liters jar height

The old problem of keeping thigs together that led to creation of boxes, crates and other means, a water coling system has a reservoir (Jar) maybe a radiator, maybe a few fans on the radiator, some pumping system and pressure regulator.This system is here to act as a basket, keeping in the s..

£5.00 Ex Tax: £5.00

40mm single fan cooler support for water pump outer diameter 27mm to 30mm

40mm single fan cooler support for water pump outer diameter 27mm to 30mm

Water pumps run on electric motors and their cooling system is far from enough if the pump runs for 24 hours a day a few days to finish a big print.  This shroud helps fitting a 40mm fan to blow against pump body improving cooling, besides the cupola has provisions to pass the wires in ..

£3.00 Ex Tax: £3.00

Hose counterbracket

Hose counterbracket

A simple piece to hold both hoses tight into the bracket.For the price you have access to download the STL file that you can print yourself...

£1.00 Ex Tax: £1.00

30mm fan cooler support for water pump outer diameter 27mm to 30mm, 3D printed

30mm fan cooler support for water pump outer diameter 27mm to 30mm, 3D printed

Water pumps run on electric motors and their cooling system is far from enough if the pump runs for 24 hours a day a few days to finish a big print.  This shroud helps fitting a 30mm fan to blow against pump body improving cooling, besides the cupola has provisions to pass the wires in,..

£9.20 Ex Tax: £6.00

40mm single fan cooler support for water pump outer diameter 27mm to 30mm, 3D printed on demand

40mm single fan cooler support for water pump outer diameter 27mm to 30mm, 3D printed on demand

Water pumps run on electric motors and their cooling system is far from enough if the pump runs for 24 hours a day a few days to finish a big print.  This shroud helps fitting a 40mm fan to blow against pump body improving cooling, besides the cupola has provisions to pass the wires in ..

£10.40 Ex Tax: £7.00

40mm dual fan cooler support for water pump outer diameter 27mm to 30mm, 3D printed on  demand

40mm dual fan cooler support for water pump outer diameter 27mm to 30mm, 3D printed on demand

Water pumps run on electric motors and their cooling system is far from enough if the pump runs for 24 hours a day a few days to finish a big print.  This shroud helps fitting a 40mm fan to blow against pump body improving cooling, besides the cupola has provisions to pass the wires in ..

£11.60 Ex Tax: £8.00

Water jar and radiator support, 3.5 liters jar height, 3D printed

Water jar and radiator support, 3.5 liters jar height, 3D printed

The old problem of keeping thigs together that led to creation of boxes, crates and other means, a water coling system has a reservoir (Jar) maybe a radiator, maybe a few fans on the radiator, some pumping system and pressure regulator.This system is here to act as a basket, keeping in the s..

£20.00 Ex Tax: £15.00

funel; top OD 65mm ID 63mm to neck OD 14 mm ID 10mm, 3D printed on demand

funel; top OD 65mm ID 63mm to neck OD 14 mm ID 10mm, 3D printed on demand

When it comes to commerically available funnels there is a wide variety that fits the majority needs.I am a minority and have special needs when it comes to funels.This one fits a version of the water cooling system top up needs on the top of the jar lid between all the cables, hoses, taps, pump..

£8.00 Ex Tax: £5.00

Tags: jar, pre drilled lid, water cooling, system, 3D printer, improvements, upgrading, cooling, temperature control