Hoses bend, they chock and water is not passing anylonger, to prevent this you need a way to keep them straight in the most delicate sector, right above the lid.
For the price you have access to download the STL file that you can print yourself.
Hose stand for water DYI cooling system
- Brand: 3D Mential
- Product Code: Hose stand
- Availability: In Stock
-
£3.00
- Ex Tax: £3.00
Related Products
funel; top OD 65mm ID 63mm to neck OD 14 mm ID 10mm
When it comes to commerically available funnels there is a wide variety that fits the majority needs.I am a minority and have special needs when it comes to funels.This one fits a version of the water cooling system top up needs on the top of the jar lid between all the cables, hoses, taps, pumps an..
£2.00 Ex Tax: £2.00
30mm fan cooler support for water pump outer diameter 27mm to 30mm
Water pumps run on electric motors and their cooling system is far from enough if the pump runs for 24 hours a day a few days to finish a big print. This shroud helps fitting a 30mm fan to blow against pump body improving cooling, besides the cupola has provisions to pass the wires in to conne..
£2.00 Ex Tax: £2.00
40mm twin fan cooler support for water pump outer diameter 27mm to 30mm
Water pumps run on electric motors and their cooling system is far from enough if the pump runs for 24 hours a day a few days to finish a big print. This shroud helps fitting a 40mm fan to blow against pump body improving cooling, besides the cupola has provisions to pass the wires in ..
£2.00 Ex Tax: £2.00
The water jar and radiator support, 2.5 liters jar height
The old problem of keeping thigs together that led to creation of boxes, crates and other means, a water coling system has a reservoir (Jar) maybe a radiator, maybe a few fans on the radiator, some pumping system and pressure regulator.This system is here to act as a basket, keeping in the same plac..
£5.00 Ex Tax: £5.00
The water jar and radiator support, 3.5 liters jar height
The old problem of keeping thigs together that led to creation of boxes, crates and other means, a water coling system has a reservoir (Jar) maybe a radiator, maybe a few fans on the radiator, some pumping system and pressure regulator.This system is here to act as a basket, keeping in the s..
£5.00 Ex Tax: £5.00
40mm single fan cooler support for water pump outer diameter 27mm to 30mm
Water pumps run on electric motors and their cooling system is far from enough if the pump runs for 24 hours a day a few days to finish a big print. This shroud helps fitting a 40mm fan to blow against pump body improving cooling, besides the cupola has provisions to pass the wires in ..
£3.00 Ex Tax: £3.00
Hose counterbracket
A simple piece to hold both hoses tight into the bracket.For the price you have access to download the STL file that you can print yourself...
£1.00 Ex Tax: £1.00
Tags: Hose stand, funnel, 3D printer, water cooling system, engineering, electronics, DYI, home improvement,